Production line of canning caps 60-100 pcs/min
Food storage containers come in different shapes and functions. Some have disposable caps, which means you have to throw the cap away after it's opened. Some types of containers are twist-open and suitable lids are used. This line also produces screw caps specifically for cans. The line has a production capacity of 60 to 100 caps per minute, depending on the size and type of cap.
Basic parameters | ||
Press (35t) | ||
![]() |
Max. speed of arm and clamp | 36 m/min |
Feed precision.............................................................................. | ± 0.1 mm.................................................................. | |
Voltage | 380V, 50 Hz | |
Nominal power | 2 kW | |
Outline size | 1740*2340*1045 mm | |
Weight | 35 t | |
Nominal pressure | 350 KN | |
Slide block travel ditance | 70 mm | |
Number of times of travel | 60-100 times/min | |
Power | 4 kW | |
Dimension | 1660*1340*2360 mm | |
Machine weight | 5000 kg | |
A twist-off cap-making injection machine(including injection pump) | ||
This equipment brings the flat metal into a round, deep shape, pours hermetic glue into it, and sends the finished product to the drying equipment. | ||
![]() |
Cap dimensions | 3-4-6 jaws; diameter 30-103 mm |
Capacity | 120caps/min at most by means of frequency modulation | |
Outline size | 1580*1260*1680 mm | |
Main motor power | 3 kW | |
2 side motors | 370W dan | |
Weight | 2000 kg | |
A dryer | ||
![]() |
Heating power | 60 kW |
Fan power | 1.5 kW * 2 | |
Max. temperature | 280°C | |
Size of drying tunnel | 3600*940*100 mm | |
Dimensions | 6000*1270*2800 mm | |
Weight | 1500 kg | |
Conveyor | ||
![]() |
This conveyor is used to convey the caps | |
Moulds | ||
![]() |
Molds for shaping metal into a specific shape. | With the help of these molds, the metal is shaped into a lid |
![]() |