Plastic pipe production line 250 kg/h

This line performs the task of producing plastic pipes that are widely used in any sphere of social life and even in people's living yards. The line has a production speed of up to 250 kg of plastic pipes per hour. The total capacity of this line operating at 380 V is 158 kW. As for the dimensions, it is 32 m long, 3 m wide and 3.5 m high. Each part of the line is described separately in the description below.

 

Basic parameters
Max. extrusion output	250 kg/hour
Total power	158 kW
Voltage	380V, 3 phase
Cooling water	3L/min, <20°C
Compressed air required	0.3 m3/min
Applicable material	HDPE
Dimension	32 * 3 * 3.5 m

Description of individual parts
1. Vacuum feeding machine
	Static pressure max.................................................................	9800 Pa....................................................................................
	Motor power	1.5 kW
	Max. capacity	500 kg
	Suction hopper volume	10L
2. Hopper dryer
	Volume	300L
	Charge capacity	300 kg/hour
	Fan motor power	0.75 kW
	Heater power	15 kW
3. Single screw extruder (US-SJ75/33)
	Output	300-350 kg/hour
	Screw diameter	⌀ 75 mm
	Max. rotation speed	150 rpm
	Heating power	24 kW
	Cooling	0.37kW * 5
	Main motor power	75 kW
	Rotating speed of main motor	1500 rpm
4. Mark line co-extruder
	Screw diameter	25 mm
	Output	0.9 kg/hour
	Heating power	1.2kW * 2
	Main motor power	1.5 kW
	Screw axes height	1000 mm
	Dimension	1450*450*1500 mm
	Weight	250 kg
5. Mould for HDPE pipes
	Diameter	25-160 mm
	Heating power	18kW
6. Vacuum calibration and cooling tank
	Length of the tank	7500 mm
	Water pump power	4kW * 2
	Vacuum pump power	4kW * 2
	Dimension	7500*650*1250 mm
	Weight	1250 kg
7. Water cooling tank
	Water tank length	7500 mm
	Material of water tank	stainless steel
	Water pump power	4kW * 1
	Dimension	7400*480*1250 mm
	Weight	850 kg
8. Hauling off machine
	Motor power	1.1kW * 3
	Hauling speed	0.5-30 m/min
	Max. force of hauling	1000 N
	Dimension	2500*980*1750 mm
	Weight	980 kg
9. Dust free cutting machine
	Motor power	2.2kW
10. Stacker for 63-160 mm pipe
	Working length	6000 mm
11. Double station winder
	Working speed	0.3-35 m/min
	Pipe diameter available	25-75 mm
12. Laser printer for PE pipe
	Laser printer	The device uses a laser to engrave letters and numbers on the hose